The harness should pull nicely through the indented hole in grommet. Peel back the loom and feed the wire through the grommet. Push the harness through the main wiring grommet by putting a slit in the nipple at the top of the grommet. Route the chassis harness along the frame and come up into the engine compartment next to the brake booster. Both red wires are live when power is applied. Important Note: Remember that the red wire at the rear of the harness is only to be used if you do not want to locate a power source inside the cab. From here we are going to make all of the connections in the cab. Step 11Ĭut off the alternate power supply sure and tuck it inside the harness. Push it in as tight as you can to ensure a good connection. It is keyed and only goes together one way. The opening is located between the bed of the truck and the tailgate.Ĭarefully connect the camera to the chassis harness. Fish the wire through the opening in the back of the bed.
Step 8įasten the emblem to the tailgate using the kit’s included body bolts. Pull the cord all the way through and connect the emblem to the body nut clips. Use the kit’s two included body nut clips and push them into the left and right side square openings.įish the kit’s included camera cable through the tailgate and out the opening in the bottom of the Ford F150. Cut the tape away from these holes in a square shape. These are not the holes that the decal fits into. Locate the square holes to the left and right of the center hole. Use a razor knife to cut away tape from center hole as a square. Use fishing line to remove the Ford emblem from the tailgate. The glass breaks very easily and most auto glass companies can do this for free.
We recommend working with a professional. Remove the rear view mirror glass prior to starting the project. If you do not have a connector, it is best to use kit CS-FTRa-332
This kit will only work with trucks with an existing 16-pin mirror connector.
#06 f150 stereo upgrade harness install#
This item can be shipped to United States.How To Install A Backup Camera On A Ford F150į-150 backup mirror kit CS-FTR-F35. The seller is “am-autoparts” and is located in Gardner, Kansas. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Safety & Security\Other Safety & Security”.
The item “Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford F150″ is in sale since Thursday, March 30, 2017. We’re here for you! Thank you for your interest and we hope to do business with you! (All Times are EST). In order to keep our prices low, we have the following purchasing policies.
#06 f150 stereo upgrade harness professional#
We suggest professional installation as modification to your vehicle is necessary, and instructions are not included. This part is designed as an upgrade from the factory. This part will not work with the factory wiring. A separate monitor/display with an RCA video input will be needed to complete this installation. Built to strict quality control standards. Add-on Upgrade for vehicles without factory camera. Textured black tailgate handle without lock provision. Rear View Camera Add On Kit w/ Wiring Harness & Tailgate Handle for Ford F150. Order by 4PM EST and this Part Ships TODAY! Lowest price on brand new, in-the-box auto parts.